The steel pull bar needs reinforced at both ends. The pull bar connecting joint point on the front of mower deck needs reinforced also. These have all needed to be welded.
The belt for the mower is an odd size and I can only find it from Swisher. I mow six acres and use 4 belts a season. The pulleys are cheap and need reinforced because the brackets holding them became loose. The steel overall seems to be of poor quality.
The 14.5 HP motor needs to be larger. Has trouble in thick 4 inch grass. Grass looks good after mowing. Would look for something a little heavir made next time. If your yard is flat with less pressure on pulling arm it may last longer.
The steel pull bar needs reinforced at both ends. The pull bar connecting joint point on the front of mower deck needs reinforced also. These have all needed to be welded.
The belt for the mower is an odd size and I can only find it from Swisher. I mow six acres and use 4 belts a season. The pulleys are cheap and need reinforced because the brackets holding them became loose. The steel overall seems to be of poor quality.
The 14.5 HP motor needs to be larger. Has trouble in thick 4 inch grass. Grass looks good after mowing. Would look for something a little heavir made next time. If y...
more